ProductConfigurator

Floor protection for Peel™ and Kokon™.

Composition

Durability

Country of Origin

Lightfastness

Sustainability

Fabric manufacturer

Select

Fabric Material

Country of Origin Fabric

Pilling

Vacuum frequently, ideally every week, on low power with a soft brush. Upholstery made from polyurethane can also be wiped with a dry or moist cloth. Be careful not to rub the material with force, as this could damage the fabric and cause loss of color.

Upkeep

First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Remove the spot as quickly as possible. Dab warm, soapy water from the outer edge and work towards the center in a circular motion. In all cases, we recommend testing stain-removal agents on an inconspicuous area first, to see if there is any effect on the cover. Make sure to dry the fabric fully before use.


Spot Removal

Melange Nap

Vacuum frequently, ideally every week, on low power with a soft brush. Upholstery made from polyurethane can also be wiped with a dry or moist cloth. Be careful not to rub the material with force, as this could damage the fabric and cause loss of color.


Hallingdal 65

Manufacturer

Finish

Tannage

Use a vacuum cleaner with a soft brush once or twice a month to remove any excess dust. Protect from direct sunlight, excessive heat and sharp objects.


Once or twice a year for thorough cleaning or for spot removal, use the foam from soap flakes stirred in warm water. Apply the foam with a dry soft cloth, minimizing any contact with water. Avoid bar soap, saddle soap, leather cleaners, household detergents or chemical products.

Noir+

Fabric material


First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Remove the spot as quickly as possible. Dab warm, soapy water from the outer edge and work towards the center in a circular motion. In all cases, we recommend testing stain-removal agents on an inconspicuous area first, to see if there is any effect on the cover. Make sure to dry the fabric fully before use.

Spot removal

Revive

Fabric Manufacturer

Material

Use a vacuum cleaner with a soft brush once or twice a month to remove any excess dust. Never use soap or water, as this will cause the characteristic velvety look and feel to disappear. Do not apply leather grease or soak the leather.

Avoid any chemical products, such as saddle soap, other leather cleaners or household products. Protect from direct sunlight, excessive heat and sharp objects. Natural marks such as insect bites, scars, wrinkles, hair whirls, or slight variations from one hide to another are typical characteristics you can expect. A patina will appear as a result of use and the leather will become smoother and shinier over time.


Ultra

First, scrape off any liquids or hardened residues with a spoon or a scoop before you proceed. Any loose particles must be vacuum cleaned before further cleaning. Liquids must be soaked up with an absorbent napkin or cloth. Remove the spot as quickly as possible. Dab warm, soapy water from the outer edge and work towards the center in a circular motion. In all cases, we recommend testing stain-removal agents on an inconspicuous area first, to see if there is any effect on the cover. Make sure to dry the fabric fully before use.

Peel™ and Kokon™ Floor Protection

Suitable for